Jungle Property Blog

Category: Blog

Your blog category

  • Caring for trees – job for the landlord or the tenant?

    There are no laws that specifically mention landlord’s or tenant’s responsibilities for trees and it is usually dependent on the Tenancy Agreement to decide. Trees are technically part of the ‘property’ the tenant is renting.

    For a range of reasons ‘generally’ tenants are not good at maintaining gardens. The idea of sitting on a groomed lawn with a glass of Pimms is much more appealing than being on your hands and knees tearing up Japanese knot-weed.

    I would say if a landlord is particular about their garden or have some shrubs or bushes that would benefit from specialist care I recommend that they offer the services of a gardener on an occasional basis for those shrubs that need it. Equally the same rule applies to trees. However trees differ from shrubs in that they are more likely to require specialist access (e.g. platforms/ladders) and the pruning/lopping of branches requires specialist knowledge if the tree is to be preserved and falling branches introduce health and safety issues.  A caring conscientious landlord would probably offer the services of an aboriculturist to take care of the trees though not obliged to. There is a ‘remote’ chance that if a landlord was to insist the tenant ‘lops the offending branch off the tree’ himself and the tenant gets injured, the landlord may face a claim for damages. I am not aware of any cases but just thinking laterally. One possible workaround is to provide the tenant contact details for an aboriculturist and suggest he does not do any pruning himself for safety reasons.

    What about your experience of gardens and trees in rental property?

  • Can my tenant fit his woodburning stove himself?

    In England & Wales, there are two routes to achieve a safe and legal installation:

    1. Installation by a HETAS registered installer

    When a HETAS registered engineer has completed an installation, they self-certify their work as compliant with legal requirements. The consumer will receive a HETAS Certificate of Compliance and the installation is notified to the local authority Building Control department so that there is filed evidence of the engineer completing work that is compliant with Building Regulations.

    To find your nearest HETAS registered engineer visit http://www.hetas.co.uk/nearest_member/

    2. Installation by an unregistered person

    For an unregistered person to install a solid fuel appliance, flue liner, hearth, flue system or anything between and including hearth and chimney pot, plans have to be submitted to, and passed by, your Local Authority’s Building Control Department.

    When the work has been completed, Building Control have to pass off the job as satisfactory and then issue a HETAS Certificate of Compliance. Local Authorities charge for this. You will also need to supply and fix a Data Plate specifying the work done and any limitations of use. This is a legal requirement. Sample Data Plates can be found in Building Regulation Document J.

    In the event of an insurance fire claim your insurance company will require the HETAS Certificate of Compliance.

    A note about chimneys and chimney lining

    There is no regulation requiring an existing chimney to be lined.

    However, the installer of any appliance must satisfy themselves that the chimney is free from defects and suitable for its intended use. If any work undertaken on the chimney (including installation of a new liner) is done in conjunction with the installation of a heating appliance, then that work is a controlled service and must be undertaken by a Competent Person or approved by your Local Authority Building Control Department. Note also that any alteration to a fireplace which renders it capable of being used for a different fuel – e.g. from gas to solid fuel, is subject to Building Regulations.

    Is your installation safe and legal?

  • Does the tenant need to employ a Gas Safe registered engineer to install a gas appliance?

    Anyone employed to work on gas appliances in domestic premises must be a Gas Safe registered engineer and competent in that area of gas work. The gas engineer’s competencies are clearly marked on the back of the engineer’s Gas Safe Register ID card. If in any doubt you can ring Gas Safe Register 0800 408 5500 or check their website here to see if the engineer is registered.

    Have all your gas appliances been installed by a Gas Safe registered engineer?